Magnetic roller fixtures that support tube and pipe on a fixture table or welding table so you can turn the work as you go. An adjustable idler stops the tube from walking off the rollers.
- Set of 2 rollers with 2 removable 5/8″ pins.
- Tested working load rating: 200 lb per roller, 400 lb per set.
- Fits 5/8″ and 16mm fixture tables. Remove the pin to use them on a standard welding table.
- Adjustable idler with 5 positions for different tube sizes.
- Supports 3/8″ to 6″ tube and pipe.
- 5 magnets per roller. Magnetic holding force 30+ lb.
- Each roller is 3 x 5 x 2.5 in.
- Printed in ASA. Color: teal.
- Keep plastic away from direct weld heat.
Made in USA.
Reviews
There are no reviews yet.